- New
This Engine has been dismantled and fully checked. New rings, crank shaft seals, fully reconditioned cylinder heads, brand new dry joint manifolds and risers, fully serviced, includes bell housing and coupling. This engine has been bench run and fully checked with Mercruiser G3 laptop. Very good condition and Ready to Install !!
Mercruiser 5.0 MPI Inboard Gasoline Engine 260-HP
$4,200.00
This Engine has been dismantled and fully checked. New rings, crank shaft seals, fully reconditioned cylinder heads, brand new dry joint manifolds and risers, fully serviced, includes bell housing and coupling. This engine has been bench run and fully checked with Mercruiser G3 laptop. Very good condition and Ready to Install !!
MerCruiser 5.0 MPI 260 HP (V8) 5.0L Inboard Gasoline Engine
The Mercury MerCruiser 5.0L MPI is a 305 cubic-inch V8 marine gasoline engine producing 260 horsepower (194 kW) at a maximum full throttle range of 4600–5000 RPM. It features multi-port fuel injection, weighs roughly 952 lbs, and uses a 12-volt electrical system.
SPECIFICATION
Horsepower: 260 hp (194 kW)
Max RPM Range: 4600–5000 RPM
Displacement: 305 CID (5.0 Liters)
Cylinders: V8
Bore and Stroke: 3.73 in x 3.48 in (95 mm x 88 mm)
Fuel System: Multi-Port Fuel Injection (MPI)
Recommended Fuel: Unleaded Regular 87 Octane (minimum)
Weight: 952 lbs (432 kg)
Alternator: 65-amp / 12-volt negative ground
Recommended Battery: 375 CCA minimum (550 CCA for cold weather/extended gear)
Oil Pressure: 30–60 psi at 2000 RPM (4 psi min at idle)
Firing Order: 1-8-4-3-6-5-7-2
Thermostat: 160°F (71°C)
KEY FEATURES
Dry-joint exhaust system: Blocks water paths to protect internal cylinders.
Single-point water drain: Drains block water quickly from one spot.
SmartCraft compatible: Supports digital engine monitoring systems.
No customer reviews for the moment.